mirror ball floor lamp

12 views

mirror-ball-floor-lamp mirror ball floor lamp

mirror ball floor lamp – If you’ve ever ordered rawhide lamp shades or any type of lampshade for that matter over the phone or online, you know it can be a challenging task. It can be quite frustrating because different individuals quantify lampshades differently.

The whole thing is complicated by telephone conversations and net ordering. If you understand how you should measure a color to get the correct fit and communicate the appropriate size, you’ll avoid problems and get the lamp colour you are expecting.

It doesn’t matter whether the color is made from rawhide or not, there are a couple of suggestions you should know to correctly measure and purchase a colour and also terminology that will allow you to insure that the individual receiving your purchase is on the same track. We produce custom rawhide lamp shades for rustic western lamps and southwest home decorating. Because we encounter this issue constantly we’ve got some hints that we use to insure the appropriate style for a lamp, even without seeing ourselves.

How to quantify:

  1. You’ll need to possess three important measurements, bottom diameter, top diameter and height. The bottom diameter is the dimension across the bottom opening of the lamp color. The top diameter is the distance across the top opening of the colour. The height of a lampshade should be measured straight up and down, not along the slant. This is where the confusion starts. When communicating the measurements different individuals and stores will set the three measurements in different order, it’s not standard, so be careful that you are not confusing the underside and height measurements for example.
  2. The height should be measured straight up and down, but a few will quantify across the slant. Both of these measurements can be very different and cause the final shade to be incorrect if confused. Always clarify the method by which the height is measured. We have found that lots of men and women who quantify the slant of the colour refer to it because the colour’s length rather than height.

Height Measuring Tip:

The main reason you need to measure height up and down, vertically, is that the height dimension of your lamp from bulb socket base to top of harp is probably the minimum vertical height you will want to cover the electrical components with the colour

Height Adjustment Tip:

If you are thinking about a stock replacement colour, your lamp’s overall height and look can be adjusted. The wire harp that holds the color within the bulb is interchangeable. This is great news if a standard shade is state an inch to brief. Instead of needing to purchase a personalized colour you could change the harp causing the color to sit lower on the lamp to give you the desired look.

Shade Mounting Type:

A standard shade mount has a centre bar across the top with a pit to the harp bracket or a washer based by three affirms that attach to the top rim of the colour. Both allow the color to be secured to the harp. A bulb clip is two wire loops that are connected to the color’s centre bar and hold the bulb.

An bulb clip adapter could be added to any standard shade allowing it to be placed within the bulb. Chandelier lamp shades normally have built-in ribbon clips created for the small flame or candelabra shaped bulbs. Shades used as hanging lamps can use an uno bracket which includes a centre ring big enough to get the bulb socket to pass through. These also appear on a few table lamps. You can use a bulb clip onto a substitute shade instead of an uno bracket.

Try placing these basic suggestions to work on your next rawhide lamp color or substitute lampshade project and you’ll be sure to measure, order and get the right size lamp colour the first moment.

Leave a reply "mirror ball floor lamp"

Author: 
    author