grow lamps lowes – In case you’ve ever purchased rawhide lamp shades or any sort of lampshade for that matter over the phone or on the internet, you know it can be a challenging undertaking. It can be very frustrating because different individuals measure lampshades otherwise.
The whole matter is complicated by phone conversations and internet ordering. If you know how you should measure a color to obtain the correct fit and communicate the correct size, you will avoid problems and receive the lamp colour you’re expecting.
It doesn’t matter whether the color is made of rawhide or not, there are a few suggestions you should know to accurately measure and order a colour and also terminology which will help you insure that the person receiving your order is on the exact same track. We create custom made rawhide lamp shades for rustic western lamps and southwest home decorating. Because we encounter this issue all the time we have some hints that we use to assure the correct look for a lamp, even without seeing the lamp ourselves.
How to measure:
- You will have to have three important measurements, bottom diameter, high diameter and height. The base diameter is the dimension across the base opening of the lamp color. The top diameter is the distance over the top opening of the colour. The elevation of a lampshade should be measured up and down, not along the slant. When communicating the measurements different folks and shops will place the 3 measurements in different sequence, it is not normal, so be careful that you’re not confusing the underside and height measurements for example.
- The height should be measured down and up, but a few will measure across the slant. Both of these measurements are often quite different and cause the final shade to be wrong if confused. Always clarify the method by which the elevation is measured. We’ve discovered that lots of men and women who measure the slant of the colour refer to it as the colour’s length instead of height.
Height Measuring Tip:
If you’re thinking about a stock replacement colour, your lamp’s overall height and appearance can be corrected. The wire harp that holds the color within the bulb is synonymous. That is great news if a standard shade is say an inch to brief. Instead of needing to order a personalized colour you could alter the harp causing the color to sit lower on the lamp to give you the desired appearance.
A normal color bracket has a centre bar across the top with a hole to the harp mount or a washer based by three supports that attach to the top rim of the colour. Both allow the color to be secured to the harp. Some smaller lamps and chandeliers don’t use a harp but rather use a bulb clip to attach directly to the bulb. A bulb clip is two wire loops which are connected to the color’s centre bar and grip the bulb.
An bulb clip adapter can be added to any standard shade to allow it to be placed within the bulb. Chandelier lamp shades usually have built-in bulb clips created for the small flame or candelabra shaped bulbs. Colors used as hanging lamps may use an uno mount that has a centre ring big enough for the bulb socket to maneuver through. These also appear on a few table lamps. It’s possible to use a bulb clip onto a substitute shade instead of an uno mount.
Try placing these basic suggestions to work on your next rawhide lamp color or substitute lampshade project and you will make certain to measure, order and receive the ideal size lamp colour the very first time.