floor lamp over dining table – If you have ever ordered rawhide lamp shades or any type of lampshade for this matter over the telephone or online, you are aware that it can be a challenging task. It can be very frustrating because different individuals measure lampshades otherwise.
The whole matter is complicated by phone conversations and net ordering. If you understand the best way to measure a shade to get the correct fit and also communicate the appropriate size, you’ll avoid problems and get the lamp colour you are expecting.
It isn’t important whether the shade is made of rawhide or not, there are a couple of tips you should know to correctly measure and purchase a colour and additionally vocabulary which can allow you to insure that the person receiving your purchase is on precisely the same track. Since we experience this issue all the time we have some hints that we use to assure the appropriate look for a lamp, even without seeing ourselves.
How to measure:
- You’ll have to possess three key dimensions, bottom diameter, top diameter and height. The bottom diameter is the measurement across the bottom opening of the lamp shade. The elevation of a lampshade should be measured up and down, not along the slant. When communicating the dimensions different folks and stores will set the three measurements in different order, it is not normal, so be careful that you are not confusing the bottom and height dimensions for example.
- The height should be measured down and up, but some will measure across the slant. These two dimensions are often very different and cause the final shade to be wrong if confused. Always clarify the method by which the elevation is measured. We have found that many people who measure the slant of the colour refer to it as the shade’s length instead of height.
Height Measuring Hint:
The main reason you need to measure height up and down, vertically, is that the elevation measurement of your lamp from bulb socket base to top of harp is Most Likely the minimum vertical elevation you will want to cover the electric components with the colour
Height Adjustment Tip:
If you are thinking about a stock replacement colour, your lamp’s overall height and look can be adjusted. The wire harp that retains the shade over the bulb is interchangeable. That is excellent news if a typical shade is say an inch to short. Instead of needing to purchase a custom colour you could change the harp causing the shade to sit on the lamp to offer you the desired look.
Shade Mounting Type:
A normal color bracket has a centre bar across the top with a pit for the harp mount or a washer centered by three affirms that attach to the top rim of the colour. Both allow the shade to be procured to the harp. Some smaller lamps and chandeliers do not use a harp but rather use a bulb clip to attach directly to the bulb. A bulb clip is two wire loops which are attached to the shade’s centre bar and hold the bulb.
An bulb clip adapter can be inserted to any typical shade to allow it to be placed over the bulb. Chandelier lamp shades usually have built-in bulb clips made for the small flame or candelabra shaped bulbs. Colors used as hanging lamps can use an uno mount which includes a centre ring big enough for the bulb socket to pass through. These also appear on some table lamps. It’s possible to use a bulb clip on a replacement shade instead of an uno mount.
Try placing these basic tips to work on your next rawhide lamp shade or replacement lampshade project and you’ll make certain to measure, order and get the ideal size lamp colour the first moment.