drexel heritage floor lamp


drexel-heritage-floor-lamp drexel heritage floor lamp

drexel heritage floor lamp – If you have ever ordered rawhide lamp shades or any type of lampshade for this matter over the telephone or on the internet, you are aware that it can be a challenging undertaking. It can be very frustrating because different individuals measure lampshades otherwise.

The whole thing is complicated by telephone conversations and internet ordering. If you understand the best way to measure a shade to get the correct fit and communicate the appropriate dimensions, you will avoid problems and get the lamp shade you’re expecting.

It isn’t important if the shade is made of rawhide or not, there are a few suggestions you should know to correctly measure and order a shade and additionally vocabulary which will help you insure that the person receiving your order is on the exact same track. We produce custom rawhide lamp shades for rustic western lamps and southwest home decorating. Because we experience this issue all the time we have some hints that we use to insure the appropriate style for a lamp, even without visiting ourselves.

How to measure:

  1. You’ll have to have three important dimensions, bottom diameter, top diameter and height. The bottom diameter is the dimension across the bottom opening of the lamp shade. The height of a lampshade should be measured up and down, not along the slant. This is where the confusion starts. When communicating the dimensions different individuals and shops will place the 3 measurements in different sequence, it is not standard, so be careful that you’re not confusing the bottom and height dimensions for example.
  2. The height should be measured down and up, but some will measure across the slant. These two dimensions can be quite different and induce the final shade to be incorrect if confused. Always clarify the method by which the height is measured. We have discovered that many people who measure the slant of the shade refer to it because the colour’s length instead of height.

Height Measuring Hint:

Height Adjustment Tip:

If you’re considering a stock replacement shade, your lamp general height and look can be corrected. The cable harp that holds the shade over the bulb is synonymous. This is excellent news if a typical shade is state an inch to brief. Rather than having to order a custom shade you could alter the harp causing the shade to sit on the lamp to give you the desired look.

Shade Mounting Type:

A standard color bracket has a centre bar across the top with a hole for the harp mount or a washer based by three affirms that attach to the top rim of the shade. Both allow the shade to be procured to the harp. A bulb clip is simply two wire loops which are connected to the color’s centre bar and hold the bulb.

An bulb clip adapter could be inserted to any typical shade allowing it to be placed over the bulb. Chandelier lamp shades usually have built-in ribbon clips made for the little flame or candelabra shaped bulbs. Colors used as hanging lamps can use an uno mount that has a centre ring big enough for the bulb socket to maneuver through. These also look on some table lamps. You can use a bulb clip on a substitute shade instead of an uno mount.

Consider placing these basic suggestions to work on your next rawhide lamp shade or substitute lampshade project and you will make certain to measure, order and get the right size lamp shade the first time.

Leave a reply "drexel heritage floor lamp"