cheap tall lamps – If you have ever ordered rawhide lamp shades or any sort of lampshade for that matter over the telephone or on the internet, you know it can be a difficult task. It can be very frustrating because different individuals measure lampshades otherwise.
The whole matter is complicated by phone conversations and internet ordering. If you understand the best way to measure a shade to obtain the correct fit and communicate the correct dimensions, you’ll avoid problems and receive the lamp colour you are expecting.
It doesn’t matter if the shade is made of rawhide or not, there are a couple of tips you should know to accurately measure and order a colour and also terminology that can help you insure that the person receiving your order is on precisely the same track. We produce custom made rawhide lamp shades for rustic western lamps and southwest home decorating. Since we experience this issue all the time we have some hints that we use to insure the correct style for a lamp, even without visiting the lamp ourselves.
How to measure:
- You will need to have three key dimensions, bottom diameter, high diameter and height. The bottom diameter is the dimension across the bottom opening of the lamp shade. The top diameter is the distance across the upper opening of the colour. The elevation of a lampshade ought to be measured straight up and down, not over the slant. This is where the confusion starts. When communicating the dimensions different individuals and shops will set the three measurements in different order, it’s not normal, so be careful that you are not confusing the underside and height dimensions such as.
- The height ought to be measured straight down and up, but some will measure along the slant. These two dimensions can be very different and induce the final shade to be wrong if perplexed. Always clarify how the elevation is measured. We have discovered that many men and women who measure the slant of the colour refer to it as the colour’s length rather than height.
Height Measuring Hint:
The reason you need to measure height up and down, vertically, is that the elevation dimension of your lamp out of bulb socket foundation to top of harp is probably the minimum vertical elevation you will want to cover the electric parts with the colour
If you are considering a stock replacement colour, your lamp general height and appearance can be adjusted. The cable harp that holds the shade over the bulb is synonymous. That is excellent news if a standard shade is say an inch to brief. Rather than having to order a personalized colour you could change the harp causing the shade to sit lower on the lamp to offer you the desired appearance.
Shade Mounting Type:
A normal shade mount has a centre bar across the top with a hole to the harp bracket or a washer based by three supports that attach to the upper rim of the colour. Both allow the shade to be secured to the harp. Some smaller lamps and chandeliers do not use a harp but instead make use of a bulb clip to attach directly to the bulb. A bulb clip is two wire loops that are attached to the shade’s centre bar and grip the bulb.
An bulb clip adapter can be inserted to any standard shade to allow it to be placed over the bulb. Chandelier lamp shades normally have built-in ribbon clips made for the small flame or candelabra shaped bulbs. Shades used as hanging lamps can use an uno bracket which includes a centre ring big enough to get the bulb socket to pass through. These also look on some table lamps. You can use a bulb clip onto a replacement shade instead of an uno bracket.
Try placing these basic tips to work on your next rawhide lamp shade or replacement lampshade project and you’ll make certain to measure, order and receive the right size lamp colour the very first moment.