aidan gray lamps


aidan-gray-lamps aidan gray lamps

aidan gray lamps – In case you’ve ever ordered rawhide lamp shades or any type of lampshade for this matter over the telephone or on the internet, you are aware that it can be a challenging task. It can be very frustrating because different individuals measure lampshades otherwise.

The entire thing is complicated by telephone conversations and net ordering. If you know how you should measure a color to get the correct fit and also communicate the correct size, you’ll avoid problems and receive the lamp shade you’re expecting.

It doesn’t matter if the color is made of rawhide or not, there are a couple of tips you should know to accurately measure and order a shade and also terminology which can help you insure that the person receiving your order is on precisely the exact same track. We produce custom rawhide lamp shades for rustic western lamps and southwest home decorating. Because we encounter this issue constantly we’ve got some hints that we use to assure the correct look for a lamp, even without visiting the lamp ourselves.

How to measure:

  1. You’ll have to possess three key measurements, bottom diameter, top diameter and height. The bottom diameter is the dimension across the bottom opening of the lamp color. The height of a lampshade should be measured up and down, not over the slant. This is where the confusion begins. When communicating the measurements different individuals and shops will set the three measurements in different order, it is not standard, so be careful that you’re not confusing the underside and height measurements for example.
  2. The height should be measured down and up, but some will measure across the slant. These two measurements can be quite different and cause the finished shade to be wrong if confused. Always clarify the method by which the height is measured. We have discovered that many men and women who measure the slant of this shade refer to it because the colour’s length rather than height.

Height Measuring Hint:

Height Adjustment Tip:

If you’re thinking about a stock replacement shade, your lamp general height and appearance can be corrected. The cable harp that holds the color within the bulb is interchangeable. That is excellent news if a standard shade is say an inch to short. Rather than needing to order a custom shade you could alter the harp causing the color to sit lower on the lamp to give you the desired appearance.

A standard color bracket has a center bar across the top with a pit to the harp bracket or a washer centered by three supports that attach to the top rim of the shade. Both allow the color to be procured to the harp. A bulb clip is two wire loops which are connected to the color’s center bar and hold the bulb.

An bulb clip adapter could be added to any standard shade to allow it to be placed within the bulb. Chandelier lamp shades usually have built-in bulb clips created for the small flame or candelabra shaped bulbs. Colors used as hanging lamps can use an uno bracket which has a center ring large enough to get the bulb socket to maneuver through. These also appear on some table lamps. It’s possible to use a bulb clip onto a replacement shade rather than an uno bracket.

Consider placing these simple tips to work on your next rawhide lamp color or replacement lampshade project and you’ll make certain to measure, order and receive the right size lamp shade the first time.

Leave a reply "aidan gray lamps"